¶ Track Equipment & Accessories Catalog
Browse all Flagtronics devices and accessories
Single-channel broadcaster for communication between the track director, remote controllers, in-car flagging units, and signboards. Ideal for small tracks with few signboards and in-car units. IP67-rated with an internal rechargeable battery and a built-in solar panel on the case; USB-C charging (cable included).
IP67 multi-channel broadcaster linking the track director, remote controllers, in-car units, and LED signboards. Antenna-package options and optional POE.
Replacement and add-on antennas for Flagtronics broadcasting equipment, offered in three ranges — Standard, Extended, and Extended Range Plus — to match track size and coverage needs.
Extendable mounting pole (6ft to 18ft) for the Single Channel Broadcaster. Raises the antenna to enhance signal range — ideal for temporary sanctioning-body setups. Best paired with a 12ft antenna cable (FT-90305) to keep the broadcaster within reach.
Extendable mounting pole for the Four Channel Broadcaster — 6ft collapsed, up to 25–30ft extended, with twist-to-lock telescoping sections. Comes with a custom bracket and hardware for mounting the Four Channel Broadcaster. Available in aluminum and fiberglass versions.
Cable that mounts the broadcaster antenna higher for better line-of-sight. Stocked at 12 ft, with custom lengths available.
Handheld wireless controller for the local flag status of up to three safety zones, with Corner Station, Start/Finish, or Pit Entry/Exit firmware.
Handheld wireless controller for the global full-track flag status, used by race control to set the flag condition for the whole circuit.
Track Director hardware & software package (annual license) giving complete control over all in-car flagging units and signboards — full and local flag control, individual-car black flagging, lap/sector/pit timing & scoring, and real-time data monitoring.
Replacement antenna that attaches to the top of the handheld flagging controller (Corner and Full Track versions).
Indoor Track Director antenna that connects directly to the Track Director computer via USB, Ethernet, or both, with Power-over-Ethernet support. Use as a primary, redundant, or secondary antenna to ensure consistent coverage from race control or the tower.
Internal rechargeable battery pack for Flagtronics remote controllers and broadcasting devices.
USB-A to USB-C charging cable for Flagtronics broadcasters and remote controllers.
Six-port USB-A charging bank that plugs into a 110V AC outlet for bulk charging of trackside equipment (remotes, broadcasters, etc.).
Single SB-100 signboard LED panel — the building block of the signboard kits, with an aluminum extrusion built into the panel for modular, easy installation. LED display clearly informs drivers of track conditions day and night.
SB-100 2-panel (1x2) signboard kit — the compact LED signboard on an extruded-aluminum frame (32cm x 32cm). Includes two panels, an aluminum frame kit, a 2-way harness, a signboard receiver, and a power distribution module. Power and firmware options available.
SB-100 4-panel (2x2) signboard kit — LED display panels on an extruded-aluminum frame (64cm x 32cm). Includes four panels, an aluminum frame kit, two 2-way harnesses, a signboard receiver, and a power distribution block. Power and firmware options available.
SB-100 8-panel (2x4) signboard kit — LED display panels on an extruded-aluminum frame (64cm x 64cm). Includes eight panels, an aluminum frame kit, harnesses, a signboard receiver, and a power distribution block. Power and firmware options available.
SB-100 9-panel (3x3) signboard kit — LED display panels on an extruded-aluminum frame for clear day/night flag communication (96cm x 48cm). Includes nine panels, an aluminum frame kit, three 3-way harnesses, a signboard receiver, and a power distribution block. Power and firmware options available.
Rigid aluminum frame kit with the hardware to mount and support a signboard at a corner-worker or start/finish flagging stand. Recommended for all installations; available for each SB-100 signboard size.
AC inverter for signboard power from a standard 110/220V AC socket. Standard output powers 2- to 6-panel signboard kits; High output powers kits with more than 6 panels.
Harness that connects signboard panels to the Power Distribution Module (PDM). Offered in 2-Way and 3-Way variations.
Connects a signboard directly to a computer via USB-A for firmware updates and flag-set display changes.
Power Distribution Module that connects the signboard, power supply, and signboard receiver for proper power and communications flow. IP67-rated with weatherproof connectors and built-in reverse-polarity protection. Available in 1-, 2-, and 3-harness versions to match signboard size.
Solar panel kit for battery-powered signboards at permanent installation sites — keeps batteries topped off and eliminates manual battery swaps. Each kit includes an MPPT solar charge controller (mounts sold separately). Available in 50W, 100W, and 370W.
6ft harness that supplies power to the signboard receiver from the PDM and carries the communications wires between the signboard and the receiver. Weather-sealed connectors on both ends.
Harness connecting the signboard PDM to supply power — weather-sealed connector on the PDM end and 10-inch leads with sealed ring terminals for the supply side. Typical supply is 12V DC (up to 28V DC).