¶ What's in This Wiki
¶ 1. Find Your Device
Browse the device catalog or search by category to find the product you need information about.
¶ 2. Review Specifications
Each device page includes detailed specs, component breakdowns, and compatible accessories.
¶ 3. Follow Installation Guide
Step-by-step instructions with warnings and tips guide you through installation and setup.
¶ How Flagtronics Works
Drivers and track officials made aware. Racing made safe. Watch the overview, then click through each part of the system.
¶ See Flagtronics in action
A quick look at how the system keeps everyone aware — from trackside flag stations to the driver's cockpit.
¶ In-Car Equipment
The FT-200 receiver shows drivers live local and full-course track status and sends confirmation back to race control. Built-in accelerometers fire instant alerts on major impacts; add GPS for timing, scoring, and pit timing.
- Easy to install
- Easy to read
- Incident detection
- Individual-car flagging
- CAN Bus communication
- Compact form factor
- Endurance-race proven
- No subscription fees
¶ Track Director Software
One dashboard for the whole event — live car location, speed, and lap/pit times; per-car flagging (black, mechanical, pit); full and local track conditions; instant impact alerts; and timing & scoring.
- Easy to set up
- Easy to operate
- Timing & scoring
- GPS monitoring of all cars
- Control of individual flagging
- Control of full & local conditions
¶ Handheld Controllers
Battery-powered remotes for instant track-condition changes. The Full Track Controller updates every in-car unit and sign board; the Corner Controller covers just its zone. Both recharge over USB-C.
- Easy to use
- Full-track & corner control
- Instant condition changes
- USB-C rechargeable
¶ Sign Boards
LED panels at corner stations take commands from the controllers or Track Director software. The modular design fits any size or shape and stays readable in low light.
- Easy to install
- Easy to use
- Remotely dimmable
- Full & local conditions
- Adds safety to traditional flags
- Portable for sanctioning bodies
¶ Broadcasters
Battery-powered relay units tie the whole system together, charging by solar or USB-C. Mount them high and spaced out with clear line of sight for the strongest signal.
- Battery powered
- Solar or USB-C charging
- Long-range coverage
- Clear line-of-sight setup
¶ What the System Delivers
Three ways Flagtronics keeps a race aware — and the capabilities behind them.
¶ In-Car Flagging
- Easy to install
- Easy to read
- Incident detection
- Individual car flagging
- CAN Bus communication
- Compact form factor
- Endurance race proven
- No subscription fees
¶ On-Track Flagging
- Easy to install
- Easy to use
- Remotely dimmable
- Full & local track conditions
- Added safety to traditional flags
- Portable for sanctioning body use
¶ Race Communications
- Easy to set up
- Easy to operate
- Timing & scoring
- GPS monitoring of all cars
- Control of individual flagging
- Control of full & local conditions
¶ Improved Safety
Rapid, wireless in-car and trackside sign board displays give notification of changing course and sector conditions. Safety officials get added peace of mind knowing drivers have been notified of hazards on course.
¶ Penalties: Minimized
With continuous, real-time updates about the state of the track, passing under yellow penalties can become a thing of the past by increasing driver awareness.
¶ Coverage: Maximized
A long-range wireless platform tailored to each track's unique topography, operating independently from the often spotty and congested cellular networks found at many tracks.
¶ Pit Timing & Incident Reporting
Through GPS, time spent in the pits is easily tracked for series where minimum pit times are required. A stopped or off-course vehicle can report its location to race control for retrieval, and vehicles not slowing appropriately for flags may be detected and their teams notified.
¶ Enhanced Visibility
An auto-dimming, sunlight-visible display shows changing race conditions during endurance racing in dark, foggy, and wet conditions. Sign board light panels at flagging stations further improve visibility and awareness.
¶ Simple & Expandable Installation
A basic install takes just minutes — USB or 12V power, placement of a GPS antenna, and mounting of the display. Take it further with CAN bus integration to tie into an existing programmable dash, or connect to a supported phone or tablet.
¶ Real-Time Flexibility
Officials can send custom flags and messages to individual cars, notifying them of events like black flags or pit requests, and create on-demand flags for session reminders or timing control. Course and corner flag status is also web accessible.
¶ Low Cost
Low upfront and recurring costs for organizers and tracks, plus inexpensive, reliable in-car hardware for racers — making state-of-the-art safety improvements accessible to every team and organization.
¶ Logging
In-car displays maintain and log all messages received with GPS timestamps, so they can be easily audited to verify reception of messages.
¶ Flexible Series Options
Series and tracks may add custom flags and features tailored to their needs, such as real-time telemetry to monitor the location and performance of all cars on track. Custom APIs, data integration, and audit logs are welcome.
¶ Thousands of miles of validation
The Flagtronics race flagging system has been developed in coordination with the ChampCar Endurance Series and has seen thousands of miles of extensive testing, refinement, and validation at their events.
¶ Build Your System Now
Whether you are a racer, a race track owner, or running a sanctioning body, Flagtronics has the wireless flagging equipment for you.
¶ Trusted by Racing Organizations Worldwide
¶ Frequently Asked Questions
🏁 Flagtronics General
What is Flagtronics and what products do you offer?
Do the Flagtronics devices require a subscription?
What are your future plans for Flagtronics products?
📱 FT-200 / FT-RD In-Car Systems
What is the FT-200 In-Car Kit?
What is the FT-RD In-Car Kit?
How do the FT-200 and FT-RD devices connect to a CAN bus?
How much power do the FT-200 and FT-RD devices draw?
Should the USB plug be easily accessible once installed?
Can I install the FT-200 or FT-RD Kit myself?
How do I update the firmware on my Flagtronics device?
👤 Driver ID Systems
How does the Driver ID Puck work?
How does the Driver ID Module work?
🛰️ GPS & Antenna
What does "see the sky" mean in reference to the GPS antenna?
💼 Ordering & Pricing
How long does it take to receive an FT-200 or FT-RD Kit?
Do you offer volume discounts or prep shop pricing?
¶ Safety Notice
Always follow safety warnings in assembly guides. Some devices require professional installation. Contact a qualified electrician for high-voltage installations.